 |
Search within results Refine by |
14 gauge galvanized steel.
from $134.50
|
A 62" long (Approximately 3' x 3') 90 degree, 24" radius curve.
$327.57
|
A 44" long (Approximately 2' x 2') 45 degree, 24" radius curve.
$327.57
|
Carrier spacing: 12 inches. Block constructed of plated steel with 2 polyethylene wheels.
from $5.48
|
Block constructed of plated steel with 4 polyethylene wheels.
from $21.68
|
Equipped with 2 oil-impregnated sleeve-bearing steel wheels.
from $55.37
|
Center Take-Off Pulley for ceiling mounted track systems.
$90.05
|
Used with flying type curtain machines.
$256.84
|
Equipped with 1 oil-impregnated sleeve-bearing steel wheel.
from $30.65
|
Non-adjustable type with 1 oil-impregnated sleeve-bearing steel wheel.
$44.85
|
For attaching double-sectioned track at center overlap. For suspended tracks only.
from $8.15
|
Recommended spacing: 6'. Steel, chain or cable suggested for track suspension.
from $4.75
|
Prevents carriers from moving beyond selected position in track.
$6.52
|
For 1" I.D. Schedule 40 pipe
$7.95
|
For 1-1/4" I.D. Schedule 40 pipe
$9.23
|
For 1-1/2" I.D. Schedule 40 pipe.
$10.35
|
3-7/8” long x 1-½” wide x 4-½” high
$23.55
|
1-7/8” long x 1-¼” wide x 4-½” high
$22.07
|
Two piece 11 gauge clamp for joining track sections assuring proper alignment of track channels.
from $68.33
|
Rubber spacer for use with Model 1749 single carrier.
$0.15
|
Provides sliding door effect. Prevents curtain from accumulating in gathers until track ends are reached.
$3.40
|
Provides sliding door effect (for machine operated tracks).
$3.40
|
Provides sliding door effect (for machine operated tracks).
$3.40
|
Plated Steel body equipped with 2 nylon-tired ball-bearings wheels.
$16.80
|
Plated Steel body equipped with 4 nylon-tired ball-bearing wheels.
$42.38
|
For reducing curtain stacking area. Used in place of carrier.
$6.37
|
Plated steel body equipped with 2 neoprene-tired ball-bearing wheels.
$22.95
|
Plated steel body equipped with 4 neoprene-tired ball-bearing wheels.
$54.37
|
Constructed of 4 nylon tired ball-bearing wheels mounted to plated steel body.
$208.25
|
|
This scenery carrier is designed for use with the Model 1700 track.
$91.62
|
Plated steel body equipped with 4 solid Kralastic wheels and 2 connectors.
$70.43
|
Two piece 11 gauge clamp for extending track sections on ceiling-mounted installations.
$84.90
|
Equipped with 2 oil-impregnated sleeve-bearing nylon wheels.
from $89.92
|
Equipped with 1 oil-impregnated sleeve-bearing nylon wheel.
from $52.88
|
Steel side plates, equipped with 1 oil-impregnated sleeve-bearing nylon wheel.
$76.70
|
Equipped with 1 oil-impregnated sleeve bearing nylon wheel.
from $65.58
|
Center Pipe Support for 1700 track series.
$13.45
|