The Track Runner is a motorized, DMX controlled carrier running along a modified section of Triple E Unibeam track. Attach scenic elements, light fixtures, curtain panels or virtually anything that requires linear movement on stage or at an event or exhibition. Using advanced encoders and 16-bit DMX control, the Track Runner is easily programmed for precise positioning and travel. For greater versatility, use with a wireless DMX transceiver for fully independent, wireless movement. Use up to 9 carriers to control 9 scenery pieces independently on a single stretch of Unibeam track (track sold separately).

• Independent drive units allow for complex tracking movements impossible with a leading track rig.
• Allows for motorized control with serpentine curves in track.
• Precise and repeatable positions and limits easily set via 16-bit DMX
• Gear rack drive enables inclined motion up to 30-degrees (reduced load limits)

• 100 Kg (220lb) load limit on Track Runner 250 Kg (550 lbs) /meter load limit on Unibeam Track
• Fast Motor Option: appx 0.5 - 16 inch/sec. speed (dependent on load)
  Slow Motor Option: appx 0.3 - 9 inch / sec. speed (dependent on load)
• Maximum Track length: 165ft
• 5-pin DMX input and pass through Optional Wireless DMX Transmitter
• 6 Channels of DMX control
• 16-bit DMX precision
• 0.04in position accuracy
• Device profiles available for easy programming
• 15A max on buss rail
• Powercon™ Input and pass thru
• 120VAC input, 200 watt consumption Optional 208/240VAC
• 6.30 x 11.42 x 7.87 in; 23.5lbs