Rosco Flamex™ PC for Paper/Cardboard
Sku: FLMX0044(SKU# changes with color/size selected below) Low Stock, please call
Flamex PC was formulated specifically to treat the many paper products commonly used in props and scenery construction.
IMPORTANT NOTE
Hi there! This item may be out of stock. If so, it's likely to be replenished shortly. Please email us at customerservice@rosebrand.com or call Sales at 800-223-1624 so that we can advise of status or recommend an alternative if your need is immediate.
Product
Rosco Flamex™ PC for Paper/Cardboard
Rosco Flamex PC has been premixed and does not require any further dilution. The method of application and the amount of Flamex required for sufficient treatment varies with the materials in use. Some discoloration and wrinkling of paper products may occur as the paper materials dry. Multiple light treatments will minimize this.
Non-toxic, eco-friendly, VOC free and water-based, one gallon treats approximately 400 square feet (37 square meters).
Flamex PC has been approved for use by the California and New York City Fire Marshall and has been tested according to NFPA 701.
The data below relates to the specific color or size that is selected (or shown) at the top of this product page.
Product Information
Name
Rosco Flamex™ PC for Paper/Cardboard
Part No.
FLMX0044
Size
5 Gallon
Features
Manufacturer
Rosco
Type
Liquid
Physical
Weight
704 Ounce
Pkg Weight
49 Pound
W x L x H
11.88"W, 11.88"L, 14.5"H
Volume
5 Gallon
Coverage
300-500 sq ft / gal
Regulatory
CA Reg. No.
C-250.01