These Pipe and Base 2.0 telescoping, heavy-wall, high-strength, anodized aluminum drape supports can be used at any length from fully collapsed to maximum stop length. Smooth, rounded ball crowns affixed to horizontal drape supports easily lock into Pipe and Base 2.0 uprights. No more hooks to tear curtains!
Units with a collapsed width of 5' or longer can extend approximately one foot past the maximum stop. Supports are 1.54" in diameter.
Made in the USA. Versatop™ - U.S. Patent No. 9,211,027, Canadian Patent no. 2,801,766 - other patents pending. Versatop™, Pipe & Drape 2.0®, Pipe & Base 2.0®, 2.0® and the Crown Logo are trademarks and property of Versatop Support Systems, LLC - used with permission
| Range |
Collapsed |
Stops at |
Primary Use |
| 2' - 3' |
2'2" |
3' |
Narrow-width drapes |
| 3' - 5' |
3'2" |
5' |
Narrow-width drapes |
| 4' - 7' |
4'2" |
6' & 7' |
Narrow-width drapes |
| 5' - 8' |
5'2" |
8' |
Narrow-width drapes |
| 6' - 10' |
6'2" |
8' & 10' |
Boothing & backwalls |
| 7' - 12' |
7'2" |
10' & 12' |
Boothing & backwalls |
| 8' - 14' |
8'2" |
10', 12' & 14' |
Boothing & backwalls |
| 9' - 16' |
9'2" |
12', 14' & 16' |
Boothing & backwalls |
*The list above is based on the use of banjo cloth. You must build in a safety factor for heavier fabric.
