When clamped on the top flange of 1400 channel the 4208 hanging clamps are used to support track systems from overhead structures when direct mounting is not available. Supporting media is provided by the installer/rigger and is not provided with the hanging clamp. Clamps are constructed of plated formed steel and are provided in 2 halves with assembly hardware.
Recommended spacing: 4' with additional units in curves and stack areas. Pipe battens and pipe clamps (optional) are recommended for suspended curved tracks.
When used in the inverted configuration on bottom flange of the track, these are the 4209 end stops. These end stops do not require drilling of the track for installation.
Do not use the 4209 with Rotodrapers® All Rotodrapers® are provided with dedicated type end stops.
